4.1.5.7 - 11/14/2024

• Solved an issue setting a RGB value on presets
• Solved an issue not being able to add new Presets
• Solved an issue plugs on a Philips Hue bridge not showing the current state
• Solved an issue starting effects on a Linux installation

4.1.5.5 - 11/1/2024

• Solved an issue where the RGB feature would not change the light setting

4.1.5.4 - 10/30/2024

• Several smaller improvments.
• Prevented regular crashing of the plugin
• Solved creating double features on Philips Hue features for lights.
• Improved sensor naming on bridge
• Enabled Philips Hue light effects on deCONZ (see notes in forum)

4.1.5.1 - 9/25/2024

• Solved an issue where the plugin would add a motion sensor, but immediatly would delete it from the Philips Hue bridge

4.1.5.0 - 7/18/2024

• Philips lights will now switch on at last known level
• A Conbee connected to the same system as HS will use the localhost address from now on

4.1.4.0 - 2/27/2024

• New lights are created with an feature "Effects" instead of "Extra"
• An issue with the buildup of a uniqueid for Philips Hue switches is resolved
• With removal of the Hue devices the colorloop button is also removed. The button is moved to the Extra/Effects feature
• Solved an issue where a device's light dim value was changed while the light was off.

4.1.2.0 - 1/30/2024

• several smaller fixes
• Hue and Sat features on light devices are depriciated, (still functions, but new devices will lack these features)
• Moved Philips Hue control to the new APIV2

4.1.1.0 - 11/13/2023

• Added support for the motion detection on Philips Hue camera's
• Added support for the Philips Hue door sensor on the Philips Hue bridges
• Revision of the Philips Hue APIV2 definitions to current status

4.1.0.4 - 10/25/2023

• Disabled the limit posed on Lightgroups on Philips Hue bridges
• Certain blinds/curtains could throw an error on updates, causing the HS device not to show the current status
• On older versions of Windows it can happen that TLS 1.1/1.2 is not enabled. In this case the new REST API version of Philips Hue bridges throws errors
• Corrected a issue sending commands while lights are off

4.1.0.3 - 8/28/2023

• Minor improvements
• Removed creating devices for Entertainment groups (Philips Hue bridge)
• Solved an issue with renaming the plugs and some sensors

4.1.0.2 - 8/8/2023

• solved a loop renaming devices when the name holds > 32 characters

4.1.0.0 - 7/21/2023

• Major changes haven been made to the naming of devices. Please check the forum for details.
• A recurring error on updating a groups color values has been solved
• Updated group handling in the APIV2 on the Philips Hue bridge
• Corrected saving settings on a Aqara FP1 sensor due to a pluginsSDK change
• Solved a false recognition of a double device
• Solved a possibility of confusing device features for a multisensor device
• several smaller improvements
• Corrected a timer issue when a scan for devices was started

4.0.8.7 - 2/6/2023

• Reviewed color calculations in the plugin
• Improvid control on IKEA color lights
• Restoring response of CT and Sat values on group devices
• Improving color control on xy values

4.0.8.6 - 1/23/2023

• The value setting for lightlevels was always showing "xx Lux" even when the setting for Lux conversion was disabled. Solved
• solved an issue with the refreshtimer for Philips He bridges
• Solved a change for light devices showing features twice
• Solved an issue with finding and repairing Philips GEN1 bridges
• solved an issue with lights being added to the plugin in an incomplete way, causing the plugin restarting after some time.
• final preperations done to include JowiHue actions and triggers in HS search results
• Corrected an issue with the sensitivity setting not displayng on certain sensors.
• Corrected updating light devices when using the xy mode* some temperature sensors report a large jump (-100) in the values from time to time. These jumps will no longer update the feature.

4.0.8.4 - 12/15/2022

• Corrected updates for Philips Hue Lightgroup groups
• * Dim values were no longer updating on the on/off devices for groups and lights.

4.0.8.3 - 11/28/2022

• for Groups the RGB feature was not set correctly. Resolved
• Setting brightness to 0% in JowiHue action for groups should put the lighs off
• Major: Plugin restart should happen a lot less frequent

4.0.8.2 - 11/15/2022

• same low battery warnings were repeated too often, solved
• Improved preventing the plugin to restart
• updated the JowiHue action to resolve a dependency on the HS device reference.
• Solved an issue on JowiHue action when controlling a group
• solved an issue with the Hue sync box when it is controlled from another device

4.0.8.1 - 10/27/2022

• Solved an issue with ending animations
• Solved an issue with the event condtions
• Solved an issue with creating the Extra device voor Groups
• resolved an issue with the refresh of devices
• esolved n issue with reconnecting bridges

4.0.8.0 - 10/13/2022

• Device type information is added to the features description
• Resolved updating groups based on lights change on a Philips Bridge
• resolved an issue with adding extra features to sensors (battery and volt fetures)
• resolved an issue with the refresh of devices
• resolved an issue with reconnecting bridges

4.0.7.10 - 9/23/2022

• Bridge Maintenance page stopped refreshing when a button was pressed. This is solved
• Solved an issue with hidden sensorgroups on deCONZ
• Restructured the way devices are created
• solved an issue with updating devices based on the Eventstream from Philips

4.0.7.9 - 9/12/2022

• Corrected the output from the dump button on bridge maintenace. It is now working on Linux as well
• Exluded Rotary devices, needs more work
• Solved an issue with calulating the RGB values
• Solved an error while setting group values.

4.0.7.8 - 9/9/2022

• Solved an issue with updating a group device

4.0.7.7 - 9/6/2022

• Solved an issue where a JowiHue action could stop working when the device was removed and re-added.
• Improved grouphandling
• dded extra tracing for power reporting for plugs
• Enabled the dump button on the bridge maintenance page
• Solved a situation where a race could start with renaming devices

4.0.7.6 - 8/17/2022

• measures to not overload the Philips Hue bridge
• Double check the existence of all light features
• improve error checking in APIV2
• Correcting wrong version number in plugin

4.0.7.5 - 7/5/2022

• removed some test logging from the standard logging
• Lightgroups are no longer supporten on the Philips Hue bridge (Rooms and Zones only)
• Groups were no longer automatically created as new devices
• Groups would not always create the correct features on the group.
• Updating a group's lights throws an error in the log
• Solved an issue where Room groups would only show one light in Bridge Maintenance

4.0.7.4 - 6/29/2022

• Solved the logging of the dual devices: Both devices are pointing to the same light. Follow up on the message, remove the device that is mentioned!
• solved the creation of extra CT devices for lights
• Solved showing double lights in groups (except for a Philips Hue bridge bug)
• Solved the doubling of feature function name (like Motion) in the feature names
• Solved an issue when renaming a device with a name > 32 characters, removing character from the left instead of right

4.0.7.3 - 6/17/2022

• Corrected using waittime in events
• Solved an issue with Linux handling with the new APIV2
• Solved an issue with whilte only devices on Philips Hue bridges being uncontrollable
• Changed handling and logging of devices using Hue APIV2 combined with APIV1
• Finetuning Aqara FP1 motion sensors
• Changed standard type of creating new groups to Zone
• Added new device configuration options (device properties/JowiHue tab)
• Added a correction for lights on Hue bridges
• Adjusted refreshrates for all gateways

4.0.7.2 - 5/26/2022

• Corrected an issue when using a JowiHue action on scenes when not using the dynamic setting.
• Correcting the update of the dim setting of lights
• added support for aqara motion sensor FP1
• Solved a major issue where maintenance on gatways was no longer performed

4.0.7.1 - 5/20/2022

• owiHue action for scenes changed to show the group a bridge scene is using.
• Solved an issue when updating temperature values on the new Philips API
• Solved an issue when using both a Philips Hue bridge and a deCONZ gateway

4.0.7.0 - 5/16/2022

• Enabled the use of searchable lists in the JowiHue actions of events
• Enabled the use of dynamic scenes on the Hue bridge

4.0.6.9 - 5/9/2022

• Enabled using effects Fire and Candles on the Hue Philips bridge
• Solved an issue where the plugin would restart on battery updates for the Philips Hue bridges
• Removed unneeded logging of APIV2 lines
• Added humidity offset in the device properties

4.0.6.8 - 4/25/2022

• Unneeded logging moved to debug level
• An error occured when using a while light on a Philips Hue bridge.

4.0.6.7 - 4/18/2022

• Solving errors during creation of sensors
• Activating APIV2 for Philips Hue (Events Only)
• Solving issue with the latest PluginSDK
• Solving issue with creation of CT devices
• Added support for Sirenes
• Enabling showing floortemperature on thermostats
• Basic support for Lutron Aurora (ZLLRelativeRotary)
• Solving a major issue where a Philips Hue bridge can be confused with deCONZ

4.0.6.5 - 3/4/2022

• Updating the properties / JowiHue tab of devices

4.0.6.4 - 3/3/2022

• Corrected small issues

4.0.6.3 - 2/21/2022

• Corrected an issue with Air Quality devices
• Corrected error in XML file

4.0.6.2 - 2/8/2022

• Added correction for the Air Quality devices

4.0.6.1 - 2/7/2022

• Solved an issue with editting groups in the bridge maintenance page
• Enabled suppressing dim effect for RGB changes
• Added support for Air Quality (TVOC) sensors
• Changed unreachable settings for lights
• Changed statusses for Lights (only after refresh of devices)
• Pressure conversion enabled HPA-inHG-mmHG
• Replaced UPNP search for Philips bridges by mDNS searches as UPNP will be disabled for Philips Hue bridge in Q2 of 2022
• Adjusted the message shown when a battery is low (or dead)
• Corrected the update of RGB values on light devices

4.0.6.0 - 11/23/2021

• major change done to renaming a device on gateways as well as in HS (check forum on details)
• Solved setting the sensitivity of a motion sensor failing
• Solved an issue with taking a snapshot of lights for creating a scene.
• during a restart of deCONZ several types of sensors are set unreachable. The plugin now delays that state after a restart of deCONZ

4.0.5.6 - 11/8/2021

• Improved renaming of a sensor device which could miss naming the features
• Corrected a wrong detection of reachabilty
• New: If a sensor becomes unreachable, the battery device is set unreachable
• Solved a casing issue when using the plugins help functions
• Excluded lumi.plug from creating a battery device
• Solved an issue with deCONZ sensorgroups not hiding correctly
• Solved an issue with determining the possible status values of a device

4.0.5.5 - 10/25/2021

• Solved an issue where the events page of HS 4.2.5.0 slowed down

4.0.5.4 - 10/20/2021

• Solved an issue on bridge maintenance for firefox users
• Added Mode feature to alarm system devices

4.0.5.3 - 10/11/2021

• For plugs with current and voltage measurement extra features are created to show there values
• Added a check on the version of deCONZ running. If it is older then 8 months a warning is created in the log
• Solved a possible error when deleting devices
• Added shortcut information button to each page of the plugin directing to information on the context
• Revised the help file information. You can now reach for the user guide from any menu of the plugin.

4.0.5.2 - 10/4/2021

• Corrected JowiHue action for stopping animations
• Made a typo on the add scenes page of creativity, correced it
• enabled renaming alarmsystem
• The "cancel all animations" button on bridge devices was no longer functioning. Solved
• changed certain pages of presets, scenes and animations not working anymore in HS 4.2.x.x
• added (very) basic support for keypads
• Enabled using alarm functions of deCONZ (see forum for more details)
• solved an issue with adding a new preset

4.0.4.10 - 8/25/2021

• Removing a device on the bridge where the device was no longer present on that bridge throws an error and does not remove the HS device. This is now corrected.
• Correcting a chance for missing an update from lights
• Solved an issue with checking the HS4 version number

4.0.4.9 - 8/10/2021

• Added support for introspection on switches on deCONZ. Check the plugin info on the forum for more details
• Corrected an issue for IKEA blinds not stopping when stop button used
• Solved an issue with name changes on lights being incomplet
• Solved an issue where a light, sensor or group update update could throw a nullable error
• Solved an issue where the setting of a lights recovery would not be saved correctly
• Solved an issue where a light with only on/off capabilities would still get a dimmer slider

4.0.4.8 - 7/12/2021

• The last changes in the plugin are not compatible to HS4 version prior to 4.1.17.0. Added a check in the plugin on this.
• Added an exception for a sengled plug to make sure it is recognized as a plug
• Correcting another error thrown on events due to a change in the PluginSDK, again hoping this will be the last one!

4.0.4.7 - 7/1/2021

• Correcting another error thrown on events due to a change in the PluginSDK, hoping this will be the last one!

4.0.4.6 - 6/28/2021

• Disabled group 0 in deCONZ. You can now savely remove the deCONZ "All lights" devices.
• Correcting an error thrown on events due to a change in the PluginSDK
• resolved updating a deive with features if deCONZ info is updated
• Solved an issue with the latest firmware of the Philips Hue HDMI syncbox. Changing entertainment groups was not working anymore. Resolved.

4.0.4.4 - 5/3/2021

• Solved a situation where the plugin could stop without an error message while handling groups
• Solved a situation where new sensors on a Philips Hue bridge would only be found when the plugin is restarted.
• Added basic recognition of airquality devices (no devices created yet)
• Corrected an issue with scriptcomands throwing errors because of the used colormode
• Added buttons to each page to be able to shortcut between plugin pages
• For Tuya devices, lots of development is going in deCONZ. Some changes are added, but are not fully tested yet
• removed tracing popups from the creativity pages
• Corrected issues with properly recognizing fan devices
• Removed "CanDim" property for devices that are plugs really
• Updated recognition of plugs to make it more reliable
• Corrected an issue where an older firmware version could be reported during start of the plugin
• Added basic support for Yale doorlocks - no keypad yet (check forum for more detail)

4.0.4.3 - 3/8/2021

• several minor improvements
• Several users seen problems with group devices throwing errors. These should be resolved now
• HA bridges could be recognized as Phiips bridges. Updated this to improve excluding HA bridges.
• It is possible that Phoscon created empty groups, cuasing the plugin to throw errors. These errors are now suppressed
• Devices for plugs were creating with the CanDim setting. This was not supposed to happen. For new devices this setting is no longer set. Existing devices cannot be reset.
• Some changes were done to the control of window covering devices
• During conversion to the HS4 version of the plugin dimming is changed to enforce usage of percentages. For users still using the standard values (0,254) in HS3 one step on the converion was skipped, this is now corrected.

4.0.4.2 - 2/19/2021

• Solved an issue in the scripting command SetLightsRGB that could throw an unexpected error
• Solved an issue when editing/adding a scene
• Some users have an issue with the Group 0 updates of deCONZ. Changed the code to prevent this error, and if the issue persist add, more info to analyze.
• When resetting the device pair values, plugs were no longer shown with a correct icon and with a dim slider. This is corrected at this point. If you have a plug with a slider on the devices page, please choose to reset the device values in the properties tab of the device, in the JowiHue tab.
• In the last version buttons for on and off were changed in position. But the control use option was not correct because of that. This will be corrected by the plugin. After the first start, this will be correct again.

4.0.4.1 - 2/8/2021

• On a deCONZ gateway, updating color lights when a up or down button was used for hue or saturation, could be delayed. This has been changed.
• The plugin was getting device updates of other HS3 plugin that would throw erre when the devices are still in HS3 format. This has been resolved.
• During import of sensormodels the new definitions were no longer saved. This has been solved. If a switch or sensor is not having a correct definitiion, please use the rebuild values function on the porperties page (JowiHue tab)
• Sometimes a warning was logged that a device was pointing at the same device, while mentioning the same device as a double. This has been corrected.
• Postion of the On/off buttons have been switched postion when creating a new devices or rebuilding device values
• Changed displaying details of presents and scenes. Now the chosen colors are showing while editing the values.

4.0.4.0 - 2/1/2021

• Changed recognition of adding new lights, new lights should now be found faster
• Removed battery recalculations for IKEA remotes as different models give different results
• Improved plug support
• More precise colorcontrol in common, which will enable RGB control in presets and scenes in a upcoming release
• Major improvements in control of IKEA color lights

4.0.3.9 - 1/22/2021

• Solved a chance of error while creating features for groups
• improved removing lights or sensors from the bridge through bridge maintenance.
• Added initial support for door locks
• Solved an issue displaying rgb values for presets
• Changed the default range for pressure devices
• Changed the default set of values for switches in deconz when creating a new device
• Improved conversion of xy/hue values to rgb and back
• HS4 no longer allows updating the time on the rootdevices if the device is created in hs4 (reason unclear). This was used to show devices are alive. From now on the battery device will be used to update when the device has been seen last time
• Corrected initialising device values for sensors and switches when using a Philips hue bridge. To correct existing issues, please delete the devices belonging to the sensor/switch en let the plugin recreate the devices
• During rebuild device values, also reset old parent device

4.0.3.8 - 12/21/2020

• Improvent recognition of plug devices, including correction for existing devices
• Enabled the use of powerstrips, where each plug can be controlled seperatly (SilverCrest/LIDL devices)
• Corrected RGB control through events/Device actions
• Corrected a display issue for JowiHue actions
• Changed tuning of a vibration sensor
• Timeout adjusted for setting lights unreachable.
• Updated creation and control of Thermostats. Eurotronics Spirit and Centralite Pearl thermostat have been tested. In general Zigbee thermostats as supported in deCONZ should be working fine from hereon.
• Updating group devices that contain plug devices only could be skipped when pressing on./off buttons on the group devices.

4.0.3.4 - 11/30/2020

• Corrected an issue in scenes where the CIE colospace (xy) was not displayed correct when editing a scene.
• Corrected an issue where an animation could skip a step in certain situations, ending prematurely

4.0.3.3 - 11/20/2020

• Resolved an issue where plugs would not report their energy usage to the HS energy database
• solved an issue setting brightness in JowiHue actions
• Corrected an issue for scripts when using "Nothing" as parameters
• Improved timely updates on the group devices located on the deCONZ gateway
• When more then one animation is running at the same time, it is possible to overload a bridge with to many commands. This will now be throttled better so errors won't occur.
• Prevented removing scenes or preset when still in use
• changed animation control, so it will prevent an animation to be able to overload a single bridge

4.0.3.2 - 11/13/2020

• Solved an issue where the conversion of preset shows loss of presets (they are still there!) - solved
• Due to an unexpected change in the latest release of deCONZ the plugin had to be updated

4.0.3.1 - 11/12/2020

• Solving an issue where the plugin cannot read the data from some deCONZ gateways

4.0.3.0 - 11/10/2020

• Corrected temperature display for thermostats, values were always shown in Celsius even when Fahrenheit is used.
• Re enabled energy reporting on plugs when reporting was available. With conversion to HS4 this was lost.
• Creativity: Animations, Scenes and Preset have been redesigned in preperation of import and export functions in the next release . Please check forum for mor details on this
• Renaming of devices went wrong for several users due to an important issue in the plugin. Please check forum for more details on this!
• JowiHue actions have been changed to support all Animation actions on one action, other actions are now obsolete
• Animations can optionally be controlled through devices
• Animations can now be paused and unpaused
• General changes regarding curtain devices
• Improved the support of the Aqara curtain motor B1
• Temperature sensors on a Philips bridge lost their correction setting in the HS4 version of the plugin. Restored in this version

4.0.2.10 - 10/23/2020

• When a Friends of Hue switch is used through a Philips Hue bridge, values set differ from deCONZ. This is now corrected.
• The plugin would no longer import new device definitions. This is solved now
• Added more info on the properties of the device in the JowiHue tab

4.0.2.9 - 10/20/2020

• Correction done for setting sensitivity on vibration sensors (Devices/properties/JowiHue tab)
• Added a parameter to the function "GetPresets" to be able to select a group of presets to be selected.
• Corrected the lifetime report to function again
• Changed the scripting engine for future expansion on existing script functions. Requests are welcome!
• After conversion from the HS3 version of the plugin to the HS4 version the bridge device was not correctly joined with the new feature device. This is corrected, existing installations HS4 devices will be adjusted as well
• Solved issues when a gateway renames a device
• Solved issues when renaming a device on the devices page
• Solved issues with devices moving from one gateway to another
• Improved conversion from HS3 to HS4 plugin

4.0.2.8 - 10/13/2020

• improved recognition of curtains and blinds
• orrected the call for access through scripting, which inadvertently was changed in the last release
• Corrected issues with moving a bridge to a different IP address.
• optimized internal administration for better device handling
• Updated group device handling, trying to minimize delays

4.0.2.5 - 10/1/2020

• Removed a possibility where the pugin could trigger a switch action during startup.
• Group device handling has been optimized to get better updates
• Using the creativity page the tab preset could only be used at the first initialization of the plugin. After that the preset could not be selected anymore. This has been solved.
• Using bridgescenes on deCONZ was not enabled. These are enabled now (new!). Not fully tested yet
• owiHue actions for Scenes would not start a scene anymore when stored on the bridge. This has been corrected
• Solved an issue wher an unneeded extra device was created for plugs. If you have this device for plugs: it is save to just delete those!
• Solved an issue where during conversion double extra devices were created for white only lights

4.0.2.4 - 9/8/2020

• Sometimes a group command could be interpreted as a light comand. This is resolved.
• When a device of the plugin was removed while the plugin was running, the plugin could stall and in some case even freeze HS4. This has been resolved. From now on you can savely delete a device of the plugin. If the light, group or sensor still exist on the gateway, devices will be created again.
• resolved an issue where a sensor for pressure measurment would be name as a Kwh power sensor. To correct this, you will need to recreate the sensor
• Added a correction for Aqara plugs, which are recognised as window covering devices, due to an issue in the deCONZ REST API
• For the previous point a worning will be logged in the HS4 log when an event is triggered that uses an Alert, Colourloop, Dim Up/Down or Blink action on the on/off device with the advice to change this event.
• Added a reset function to the device properties/JowiHue tab to repair graphics values when needed. Make sure to read the details on the forum release notes!
• Bridgescenes were not shown in the selection list of JowiHue actions when creating an event that activates a scene. This is solved

4.0.2.3 - 8/11/2020

• Corrected several issues on the creativity page, where especially animations were hard to create or update.
• Corrected sending xy values in JowiHue actions
• Changed the conditions for sensors and lights on deCONZ to be marked unreachable.
• Updating a lights dim value would sometimes be missed. If this happens, the correction will be done based on the polling speed
• Creating new features would not set the standard location and location2 values correctly. This has been corrected.
• Transition time for off commands was reintroduced in the last version. This caused issues. It is now optional in the settings. Please check the warnings on this option

4.0.2.2 - 7/31/2020

• Corrected an issue with the fan module where controlling the light would also control the light
• There was a chance that a preset snapshot was not saved correctly. Corrected.
• Presets could not be saved into a renamed group, this is corrected
• JowiHue actions, using a delay value could delay more then wanted if seconds were used, those became minutes!
• Excluded the loopback address from UPNP calls to prevent a gateway changing IP addresses when used locally
• When in the JowiHue actions Hue, Saturation or CT values were used, they could be erased and not used.
• Made sure the default transition time is added on an off command.
• Changed the shutdown proces, for yet unknown reason the plugin stays running when HS4 is gracefully shutdown. Added a forced close until this is resolved.
• Added extra trace information in creating presets
• Added a correction for thermostats, where the plugin data was erased by HS4 by replacing it with "thermnumber1" and removing all other items.
• Corrected an issue with using multiple Hue Sync boxes. Only the first registered Hue Sync Box would be used in the Sync boxes page
• Excluded a Aqara light ("lumi.light.aqcn02") to be recognised as a smart blind

4.0.2.1 - 7/14/2020

• Reinstated the display of a device on the Properties/JowiHue tab of a device.
• Better error catching for the bridge maintenance page
• On an initial installation, selecting a JowiHue action for animations or scenes could result in an error when no scenes or animations are present. This will now show a clear message.
• Corrected an issue with shutdown of the plugin which could result in throwing an error.
• Corrected the usage of Lux level, so it keeps in range of 0 to 51000
• Corrected the use of transition time in JowiHue actions. It was limited to a value of 25,5 second where there should be no limit.
• Added a setting to the properties of smart blind devices. With this setting you can set the maximum closure and open values for the blind. The plugin will use these values as limite for opening and closing the blind. You can find it on the properties of the device per blind, the JowiHue tab.

4.0.2.0 - 7/6/2020

• Initial release

4.0.0.4 - 4/23/2020

• Conversion of event actions are now complete, without issues. Including time delays
• Updated the plugin to follow the setting for brightness in the settingspage. If it is set to percentage, all brightness values are now shown in percentage anywhere in the plugin. Earlier only the device would be set to the percentage value.
• I noticed that events with conditions based on white only lights - single devices in HS3 - will not work and might loop as only the parent device in the event is addressed after converting the device. You will have to edit these events after the conversion to include the feature device. This cannot be done by the plugin as events cannot be changed by plugins.
• You can now set a default location and location2 in the settings of the plugin, used for creating new devices.
• Enabled creating a battery device for the IKEA blinds as sensor
• Solved an issue created by the latest deCONZ release where the coordinator is also presented as a light. The plugin would create devices for it that are incomplete. Now the plugin will ignore these devices.
• Corrected an issue with the animation edit page not responding to the cancel button
• On the add new bridge page you can now input a IP address and port if no new bridges are found
• Correction for settingspage on naming features
• Solved an issue on Linux causing sensors to not update the devices anymore.
• * Correction settings for temperatures, created in the HS3 version of the plugin are now saved on the bridge or gateway and applied to every app using the same bridge or gateway
• Added a new settings page for naming features after changing a device's name (check forum)
• Group devices would never update to the off value. Solved
• Animations are now complete! Keep a backup of the JowiHue database and test?
• Solved an upper/lowercase issue on Linux
• Solved an issu e while saving scenes with selected groups
• Introduced an issue during conversion in version 4.0.0.14, which is resolved now
• Another issue during conversion of devices could occur when location2 in HS3/4 is not activated. this would result in a looping error creating features. This is solved.
• Solved an issue that could occur during the conversion of HS3 devices to HS4 devices. This issue could stop the conversion completely, causing lots of errors afterwards
• Using the scene option for switching off lights, was not working correct for groups. This is working correct now.
• The miscelannious hunt is now ended :-)
• Clicking any undo action during edit of a scene clears the scene name. The name is now retained.
• Preset test light selection is now retained until next restart of the plugin
• Trace options were not correctly saved, causing the trace would never start at initalisation of the plugin. This is solved.
• When creating a new scene the version could be missed. A restart of the lugin will then go into a loop. This is solved,
• In edit scenes the "Swtich Off" option and transition field were not available. Both are added now.
• With a Lux level setting diabled on the settings page, the plugin would throw errrors while creating the lightlevel features.
• Plugin lost port number to use when a deCONZ gateway is used on port other than port 80
• Solved an issue removing bridges when daylight sensor has a device
• Updated removal of bridges to be more robust
• Added extra trace info while removing a bridge
• Repared failing webhook connection for deCONZ gateways
• Caught a few minor bugs
• Updating functionality of Animations, but still work in progress....
• Solved an issue where a JowiHue action could show an inaccurate error message when updating an action created in HS3.
• corrected updating device properties (JowiHue tab) on device propeties
• Enabled removing bridges with the bridge maintenance page
• Re-enabled editing scenes, was missed in last beta
• Solved a contraints error while initializing the database
• Finishing functionality for Hue Play HDM Sync box
• Still todo: animations!
• Solved some minor issues
• Added support for HUE Play HDMI sync box
• Please check the forum for latest information!
• Do not use the plugin for "production" yet. Always have a backup available
• Many smaller changes
• Adding and editing aminmations not possible yet. Existing animations are working
• Enabled Scenes
• Conversion of devices completed
• Conversion of actions in event is not complete, please check forum for details

4.0.0.0 - 1/29/2020

• Converted creativity presets page to responsive page NICE! But a pain to get there!
• Many small changes, mainly minor improvements of the HS3 version
• Improved settings page
• Added Device config pages
• Solved an issue with Vibration sensors
• Enabled large parts of Bridge maintenance
• Todo: Device actions blink/Alert/Colorloop/Down/Up buttons
• Todo: Bridge maintenance for lights and sensors
• Todo: Creativity pages for new/updating presets, scenes and animation
• What works: Settings can be set, some are removed
• What works: Adding new bridges and scanning for devices works
• What works: Existing scenes and animations should work
• What works: Events new style are implemented
• What works: Devices are controllable
• Only for use as beta!